Z Technology, Inc.
TUNED DIPOLE SET
- Frequency Range of 25MHz to 1000MHz
- Receive and Transmit Capability
- Each Antenna Calibrated with Ant. Factor Tables
- FCC or VDE Site Attenuation
- FCC Balun Design
- Low Loss, Low VSWR
The tuned dipole antenna set provides an accurate standard for precise site attenuation
measurements. Each dipole set is manufactured per the FCC balun design and is individually
calibrated. All sets come contained in a rugged, lightweight storage case which includes
four baluns, elements, cables, a tape measure and a clamp for tripod mounting. |
 |
Model: AA-1 (Includes
Balun 1, 2, 3, 4) |
| Model |
Freq. Range
(MHz) |
Antenna
Factor(dB) |
Ave.
VSWR |
Max Cont
Pwr Inp. (watts) |
Balun
Length (in) |
WT
(lb) |
| BALUN 1 |
25 to 70 |
-3 to +6 |
<1.6:1 |
20 |
23.7 |
1.2 |
| BALUN 2 |
65 to 180 |
+5 to +14 |
<1.6:1 |
20 |
21.7 |
0.7 |
| BALUN 3 |
170 to 340 |
+13 to +19 |
<1.6:1 |
20 |
12.5 |
0.5 |
| BALUN 4 |
325 to 1000 |
+20 to +29 |
<1.6:1 |
20 |
9.0 |
0.4 |
Note: Individual Dipoles/Baluns can be ordered separately.
LOG PERIODIC ANTENNAS
- Frequencies: 25-1000MHz up to 800-2600MHz
- Receive and Transmit Capability
- Each Antenna Calibrated with Ant. Factor Tables
- Rugged Construction
|
 |
Each antenna is lightweight, compact and has been manufactured to ensure constant gain,
low, VSWR and high power handling capabilities. These log periodic antennas will display
efficient performance characteristics through the broad frequency range. Note:AA-7 is a
Bi-Log Antenna design.
LOG PERIODIC ANTENNAS |
| Model |
Frequency Range
(MHz) |
Antenna Factor
(dB) |
Max. Continous
Power Input (watts) |
HT.
(in) |
Width
(in) |
WT.
(lb) |
| AA-4 |
300-1000 |
14 to 25 |
500 |
22 |
20 |
2.5 |
| AA-6 |
150-1000 |
8 to 26 |
500 |
45 |
33 |
6.0 |
| AA-7 |
25-1000 |
10 to 26 |
500 |
41 |
42 |
5.5 |
| AA-8 |
800-2600 |
22 to 33 |
500 |
13 |
8 |
1.5 |
MONOPOLE ROD ANTENNA
- Broad Frequency Range of 350KHz to 60 MHz
- Each Antenna Calibrated with Ant. Factor Tables
- High Sensitivity
The active monopole can drive any field strength meter with 50 ohm input impedance and
will perform FCC, MIL-STD and TEMPEST tests. |
 |
| Model |
Frequency Range
(MHz) |
Antenna Factor
(dB) |
Ground Plane
Dim. (in) |
Rod Length
(in) |
WT (lb) |
| AA-2 |
.35 to 60 |
-4 to +3 |
18 X 18 |
8.5 - 43 |
5.0 |
BICONICAL ANTENNA
- Frequency Range: 20 to 330MHz
- Receive and Transmit Capability
- Each Antenna Calibrated with Ant. Factor
Tables
- FCC, MIL-STD, VDE and TEMPEST Testing
- Folding Elements
The biconical antenna provides reliable, repeatable measurements and can be rapidly
deployed. It features the mobility of a small package and can be contained in an optional
transit storage case. |
 |
| Model |
Frequency Range
(MHz) |
Antenna Factor
(dB) |
Max. Cont.
Pwr Inp (Watts) |
HT.
(in) |
Width
(in) |
WT.
(lb) |
| AA-3 |
20 to 330 |
8 to 27 |
4 |
29 |
52 |
4.3 |
ANTENNA CARRYING CASE
Part Number: TSC-2542
- Rugged Construction
- Each Antenna and Component has a Specific Storage Compartment
- Loss and Breakage are Virtually Eliminated
- For use with One or All of the following: AA-2, AA-3 and AA-4
|
 |
TRIPOD
Part Number: ATU-251
- Rugged Construction
- Tripod Mount is Standard 1/4 - 20 Male Thread
- Lightweight and Compact
- Non Conductive Wood Design
- Reversible Legs: Rubber Feet for Indoor Use, Spike Tips for Outdoor Testing
- Closed Height : 40 inches
- Extended Height: 64 inches
|
 |
AZIMUTH/ELEVATION HEAD
Part Number: AEH-251
(for above Tripod)
- Interfaces between Antenna and Tripod
- Use to position Antenna any Direction Desired
|
TRIPOD CARRYING CASE
Part Number: TCC-251
(for Above Tripod)
COAXIAL CABLES
| Part Number |
Length |
Cable |
Connector
(each end) |
| CAB58-3B |
3 Meter |
RG-58U |
BNC |
| CAB214-3N |
3 Meter |
RG-214U |
N |
| CAB58-10B |
10 Meter |
RG-58U |
BNC |
| CAB214-10N |
10 Meter |
RG-214U |
N |
CAB58-xxB
Specify length |
xx Meter |
RG-58U |
BNC |
CAB214-xxN
Specify length |
xx Meter |
RG-214U |
N |